Winston Cdi Flexible Furler 2 Manual

CDI CDI Flexible Headsail Furler for Macgregor 26D

Furlers CDI Flexible Furlers – Sail Care

cdi flexible furler 2 manual

CDI Flexible furler opinions Sailboat Owners Forums. The Flexible Furler is warranteed to remain functional for 7 years from date of purchase. You must be the original purchaser of the unit. If, during this period, any part becomes non-functional, CDI will repair or replace it, free of charge, except for freight., Headsail Furler Overview. Whether large or small, your cruising boat or daysailor should have a furling system. Going forward to the bow of any sized boat can be potentially dangerous, especially as the winds come up and you have to change sails. The Flexible Furler can be used to both reef and furl your sail in any wind condition..

What happened to my CDI furler? MacGregorSailors.com

CDI Flexible Furler FF9.0 Obersheimers Sailor Supply. 2. Keep your unused halyards fl ipped to the aft side of your spreaders and lightly tensioned. 3. If the unit becomes hard to furl, investigate and correct the cause. Failure to do so can lead to the failure of the forestay. USAGE WARNINGS: The Flexible Furler is NOT designed to be used while your boat is in the, Spinnaker Furler. If there is not 6” minimum clearance at the top of the system between the Spi nnaker Furler Top swivel and the headstay, a Spinnaker crane may need to be fabricated or purchased to provide the necessary clearance. The crane is designed to move the Spinnaker halyard.

Furler CDI Replacement Halyard CP-16, CP-16.5, CP-18, CP-22, C-22, C-25, C-250, CP-26; Furler CDI Replacement Halyard This is a replacement Halyard for the Cruising Designs Flexible Furlers FF1, FF2, and FF4. The flexible furler uses an internal halyard instead of your ship's halyard. One end of the halyard is de-cored and has a small metal CDI Flexible Furlers are made by Cruising Designs as the best selling low cost roller furling unit available. Home > Headsail Roller Furling Systems > CDI FF2 Headsail Roller Furling Unit Categories. Sails in Stock. Balboa. Balboa 22. Mainsails. The Flexible Furler can be used to both furl and reef your sail in any wind condition. P.

Jul 11, 2017 · What happened to my CDI furler? A forum for discussing boat or trailer repairs or modifications that you have made or are considering. Moderators: Catigale, Paul S, Page 2 WARNINGS – READ BEFORE INSTALLING OR USING YOUR FURLER Improper installation of the Flexible Furler or improper reinstallation of the forestay can cause failure of the forestay, and could result in the loss of the mast and injury to crew members. PRE-INSTALLATION WARNING: You must use toggles at both ends of the forestay.

2. The Flexible Furler uses a built-in 1/4” rope halyard instead of your boats halyard. One end of the halyard has had the rope core removed leaving only the outer braid while the other end has both core and braid intact. The de-cored end is closest to the metal ferrule. … Feb 14, 2010 · We have a CDI flexible furler with a 115% genoa that was on our Hunter 22 when we purchased the boat and so far have been very pleased with it. But then again, it is also the first and only flexible furler whit which we have experienced.

I have a CDI furler on my boat also. It came with it when I bought it. Being new to furlers I didn't realize anything was wrong. I just thought it must be a first generation furler and they hadn't figured out how to keep the furling line from falling off the drum. So when I saw your post, I thought, "the whole thing is supposed to spin around." Instruction Manual: 1049 --FF2 Design Changes * 1997 New Halyard -- The 3/16 rope halyard with molded-on black plastic traveller has been replaced by part # 1922. The new halyard (1922) uses a 1/4" rope with a stainless steel ferrule swaged on. Both halyards function in the same way and are interchangable.

Feb 14, 2010 · We have a CDI flexible furler with a 115% genoa that was on our Hunter 22 when we purchased the boat and so far have been very pleased with it. But then again, it is also the first and only flexible furler whit which we have experienced. Mar 18, 2017 · Your old hank on head sails have done your well, but now is the time to replace it with a furling headsail from Precision Sails and a furling system from CDI Furlers. The Flexible Furler can be

FLEXIBLE FURLER FEATURES What makes a Flexible Furler different from the rest? Simplicity. Often, the simplest product is the best product. The Flexible Furler has one-eighth the number of parts of competitive systems and is the easiest to install, operate and maintain. for sale is one 4" stainless steel sail furling drum by cdi. flexible furler 2. includes instruction manual. please be familiar with this item & its operation before purchasing. needs replacement cord & stay "luff". i have the 20 foot long luff piece but it is too costly to ship. …

Jul 23, 2018 · Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own … The CDI Flexible Furler one piece, PVC single groove luff extrusion is stiff in torsion for better reefing and furling but flexible in other directions for easy handling when raising and lowering the mast — a great choice for trailerables and other boats where the mast is frequently raised and lowered.

Sep 25, 2015 · When I purchased SV Mia Noi, she had a 'hanked-on' jib which was not suitable for my plan to rig the boat all lines aft and safely sail solo. I bought a CDI Flexible Furler and 135% Furling Sail from Catalina Direct. The time between when I purchased the CDI Flexible Furler and installed it… I have the CDI Flexible Furler FF4 on Robin Lee. I purchased my system as part of a package deal, including my new mainsail and a new 135% genoa, from JSI Sails, who is a CDI reseller. My genoa was cut by JSI exactly to fit the furler, and has white UV protection cloth at the foot and leach.

CDI FLEXIBLE FURLER 2: Installation & Operating Instructions Manual Brand: CDI Category: Boat Size: 0.87 MB Pages: 18. Please, tick the box below to get your link: Get manual Manualslib has more than 31 CDI manuals Checkout popular CDI categories Transmitter Manuals; Headsets Manuals 2. Keep your unused halyards flipped to the after side of your spreaders and lightly tensioned. 3. If the unit becomes hard to furl, investigate and correct the cause. Failure to do so can lead to the failure of the forestay. USAGE WARNINGS: The Flexible Furler is NOT designed to be used while your boat is in the

Furler CDI Replacement Halyard CP-16, CP-16.5, CP-18, CP-22, C-22, C-25, C-250, CP-26; Furler CDI Replacement Halyard This is a replacement Halyard for the Cruising Designs Flexible Furlers FF1, FF2, and FF4. The flexible furler uses an internal halyard instead of your ship's halyard. One end of the halyard is de-cored and has a small metal Oct 20, 2011 · http://search.sailrite.com/?freeText=CDI The Cruising Design (CDI) furler provides one of the most inexpensive, effective ways to get more use from your boat...

The flexible furler is a hassle-free "set and forget" reefing system. It never needs maintenance and is durable enough to withstand most any mishap. The luff was designed to maintain proper sail shape in the reefed mode and to reef safely even if high winds force you to use a winch. Jul 09, 2012 · CDI Flexible furler I have CDI Furling on my boat. It IS flexible in one direction; it is flat plastic section approx 30mm x 10mm I bend it round the side of the boat when trailing tied to the pulpit along stanchions and back to the pulpit.

CDI Flexible Headsail Furler Foolproof furling, recommended by Practical Sailor The CDI furler has enjoyed rave reviews from owners of boats of all sizes. It's specifically designed for those who use their boats for cruising, casual racing, or day sailing. Feb 14, 2010 · We have a CDI flexible furler with a 115% genoa that was on our Hunter 22 when we purchased the boat and so far have been very pleased with it. But then again, it is also the first and only flexible furler whit which we have experienced.

CDI Flexible Furlers Precision Sails Ltd. for sale is one 4" stainless steel sail furling drum by cdi. flexible furler 2. includes instruction manual. please be familiar with this item & its operation before purchasing. needs replacement cord & stay "luff". i have the 20 foot long luff piece but it is too costly to ship. …, I have the CDI Flexible Furler FF4 on Robin Lee. I purchased my system as part of a package deal, including my new mainsail and a new 135% genoa, from JSI Sails, who is a CDI reseller. My genoa was cut by JSI exactly to fit the furler, and has white UV protection cloth at the foot and leach..

CDI Flexible Furler FF9.0 Obersheimers Sailor Supply

cdi flexible furler 2 manual

CDI Flexible furler opinions Sailboat Owners Forums. Spinnaker Furler. If there is not 6” minimum clearance at the top of the system between the Spi nnaker Furler Top swivel and the headstay, a Spinnaker crane may need to be fabricated or purchased to provide the necessary clearance. The crane is designed to move the Spinnaker halyard, The flexible furler is a hassle-free "set and forget" reefing system. It never needs maintenance and is durable enough to withstand most any mishap. The luff was designed to maintain proper sail shape in the reefed mode and to reef safely even if high winds force you to use a winch..

Dolphin24.org A Website For Dolphin Owners and Others

cdi flexible furler 2 manual

CDI Flexible Furler Parts - FF2. CDI Furlers are flexible roller furler that work with your genoa and jib sails. Weekend sailboats as well as coastal cruisers carry the CDI roller furling and reefing system allowing for ease of transportation and durability. The CDI furlers work with luff tape number 6 (5mm) … The flexible furler is a hassle-free "set and forget" reefing system. It never needs maintenance and is durable enough to withstand most any mishap. The luff was designed to maintain proper sail shape in the reefed mode and to reef safely even if high winds force you to use a winch..

cdi flexible furler 2 manual


Furler Parts. Schaefer Marine carries all your furling needs: Below are a listing of parts for the CF-500, CF-700, 1100, 2100 & 3100 Furling Systems. For your convience print the PDF Parts List for the system you are interested in and go to our parts catalog to find all your necessary pieces. The contact us at 508-995-9511, our contact your CDI Flexible Furler Limited 6 Year Warranty. The Flexible Furler is warranted to remain functional for 6 years from date of purchase. You must be the original purchaser of the unit. If, during this period, any part becomes non-functional, CDI will repair or replace it, free of …

For more detailed information on the replacement parts see the CDI FF2 Manual by following this link. This part is CDI part #2010 or "B" in the diagram. it is a nice upgrade and truly the only way to get maximum performance and ease of use out of the CDI flexible furler system. Peak Sails is an authorized retailer for the complete line of ProFurl furlers, parts and accessories. In addition to the Cruising Series which can be ordered below, we also have an in-house specialist to assist you in the purchase of ProFurl's wide array of headsail systems:

CDI Flexible Furling System Unboxing The CDI Furling System FF6 has been around for 2 decades and has become a very well know, reliable furling system for the cruising community. The system is built well and will last you many years. The continuous furling line is easily fitted and removed from the furler, so it can be left on deck when the sail and furler are stowed below. Secure & flexible attachment options. Furlers and top swivels have retained clevis pins and top swivels have a snag-free low profile shackle pin head. Attachment options include quick release pins

Replacement luff support pin and ring for the CDI FF2 roller furling system. For more detailed information on the replacement parts see the CDI FF2 Manual by following this link.This part is … Furler CDI Replacement Halyard CP-16, CP-16.5, CP-18, CP-22, C-22, C-25, C-250, CP-26; Furler CDI Replacement Halyard This is a replacement Halyard for the Cruising Designs Flexible Furlers FF1, FF2, and FF4. The flexible furler uses an internal halyard instead of your ship's halyard. One end of the halyard is de-cored and has a small metal

Feb 14, 2010 · We have a CDI flexible furler with a 115% genoa that was on our Hunter 22 when we purchased the boat and so far have been very pleased with it. But then again, it is also the first and only flexible furler whit which we have experienced. Mar 18, 2017 · Your old hank on head sails have done your well, but now is the time to replace it with a furling headsail from Precision Sails and a furling system from CDI Furlers. The Flexible Furler can be

2. Keep your unused halyards flipped to the after side of your spreaders and lightly tensioned. 3. If the unit becomes hard to furl, investigate and correct the cause. Failure to do so can lead to the failure of the forestay. USAGE WARNINGS: The Flexible Furler is NOT designed to be used while your boat is in the 2. Keep your unused halyards fl ipped to the aft side of your spreaders and lightly tensioned. 3. If the unit becomes hard to furl, investigate and correct the cause. Failure to do so can lead to the failure of the forestay. USAGE WARNINGS: The Flexible Furler is NOT designed to be used while your boat is in the

cdi flexible furler 2 manual

Furler CDI Replacement Halyard CP-16, CP-16.5, CP-18, CP-22, C-22, C-25, C-250, CP-26; Furler CDI Replacement Halyard This is a replacement Halyard for the Cruising Designs Flexible Furlers FF1, FF2, and FF4. The flexible furler uses an internal halyard instead of your ship's halyard. One end of the halyard is de-cored and has a small metal CDI Furlers are flexible roller furler that work with your genoa and jib sails. Weekend sailboats as well as coastal cruisers carry the CDI roller furling and reefing system allowing for ease of transportation and durability. The CDI furlers work with luff tape number 6 (5mm) …

CDI Flexible Furler Un-Boxing Precision Sails Ltd

cdi flexible furler 2 manual

CDI Flexible Headsail Furler SailboatOwners.com. CDI FLEXIBLE FURLER 2: Installation & Operating Instructions Manual Brand: CDI Category: Boat Size: 0.87 MB Pages: 18. Please, tick the box below to get your link: Get manual Manualslib has more than 31 CDI manuals Checkout popular CDI categories Transmitter Manuals; Headsets Manuals, Oct 20, 2011 · http://search.sailrite.com/?freeText=CDI The Cruising Design (CDI) furler provides one of the most inexpensive, effective ways to get more use from your boat....

CDI Flexible Furler FF4 Obersheimers Sailor Supply

Dolphin24.org A Website For Dolphin Owners and Others. CDI Furlers are flexible roller furler that work with your genoa and jib sails. Weekend sailboats as well as coastal cruisers carry the CDI roller furling and reefing system allowing for ease of transportation and durability. The CDI furlers work with luff tape number 6 (5mm) …, To my untrained eye, that looks to me like a flexible furler, something akin to a CDI or hood seaflex. If so, an excerpt from the cdi manual has the answer: the furler can be "straightened by bending the luff in the opposite sense until it comes straight. Another option is to put the luff in ….

To my untrained eye, that looks to me like a flexible furler, something akin to a CDI or hood seaflex. If so, an excerpt from the cdi manual has the answer: the furler can be "straightened by bending the luff in the opposite sense until it comes straight. Another option is to put the luff in … CDI FLEXIBLE FURLER 2: Installation & Operating Instructions Manual Brand: CDI Category: Boat Size: 0.87 MB Pages: 18. Please, tick the box below to get your link: Get manual Manualslib has more than 31 CDI manuals Checkout popular CDI categories Transmitter Manuals; Headsets Manuals

Replacement luff support pin and ring for the CDI FF2 roller furling system. For more detailed information on the replacement parts see the CDI FF2 Manual by following this link.This part is … To my untrained eye, that looks to me like a flexible furler, something akin to a CDI or hood seaflex. If so, an excerpt from the cdi manual has the answer: the furler can be "straightened by bending the luff in the opposite sense until it comes straight. Another option is to put the luff in …

Sep 25, 2015 · When I purchased SV Mia Noi, she had a 'hanked-on' jib which was not suitable for my plan to rig the boat all lines aft and safely sail solo. I bought a CDI Flexible Furler and 135% Furling Sail from Catalina Direct. The time between when I purchased the CDI Flexible Furler and installed it… Jul 09, 2012 · CDI Flexible furler I have CDI Furling on my boat. It IS flexible in one direction; it is flat plastic section approx 30mm x 10mm I bend it round the side of the boat when trailing tied to the pulpit along stanchions and back to the pulpit.

Headsail Furler Overview. Whether large or small, your cruising boat or daysailor should have a furling system. Going forward to the bow of any sized boat can be potentially dangerous, especially as the winds come up and you have to change sails. The Flexible Furler can be used to both reef and furl your sail in any wind condition. For more detailed information on the replacement parts see the CDI FF2 Manual by following this link. This part is CDI part #2010 or "B" in the diagram. it is a nice upgrade and truly the only way to get maximum performance and ease of use out of the CDI flexible furler system.

I have the CDI Flexible Furler FF4 on Robin Lee. I purchased my system as part of a package deal, including my new mainsail and a new 135% genoa, from JSI Sails, who is a CDI reseller. My genoa was cut by JSI exactly to fit the furler, and has white UV protection cloth at the foot and leach. Sep 25, 2015 · When I purchased SV Mia Noi, she had a 'hanked-on' jib which was not suitable for my plan to rig the boat all lines aft and safely sail solo. I bought a CDI Flexible Furler and 135% Furling Sail from Catalina Direct. The time between when I purchased the CDI Flexible Furler and installed it…

The flexible furler is a hassle-free "set and forget" reefing system. It never needs maintenance and is durable enough to withstand most any mishap. The luff was designed to maintain proper sail shape in the reefed mode and to reef safely even if high winds force you to use a winch. Page 2 WARNINGS – READ BEFORE INSTALLING OR USING YOUR FURLER Improper installation of the Flexible Furler or improper reinstallation of the forestay can cause failure of the forestay, and could result in the loss of the mast and injury to crew members. PRE-INSTALLATION WARNING: You must use toggles at both ends of the forestay.

Instruction Manual: 1049 --FF2 Design Changes * 1997 New Halyard -- The 3/16 rope halyard with molded-on black plastic traveller has been replaced by part # 1922. The new halyard (1922) uses a 1/4" rope with a stainless steel ferrule swaged on. Both halyards function in the same way and are interchangable. Furler CDI Replacement Halyard CP-16, CP-16.5, CP-18, CP-22, C-22, C-25, C-250, CP-26; Furler CDI Replacement Halyard This is a replacement Halyard for the Cruising Designs Flexible Furlers FF1, FF2, and FF4. The flexible furler uses an internal halyard instead of your ship's halyard. One end of the halyard is de-cored and has a small metal

To my untrained eye, that looks to me like a flexible furler, something akin to a CDI or hood seaflex. If so, an excerpt from the cdi manual has the answer: the furler can be "straightened by bending the luff in the opposite sense until it comes straight. Another option is to put the luff in … Jul 11, 2017 · What happened to my CDI furler? A forum for discussing boat or trailer repairs or modifications that you have made or are considering. Moderators: Catigale, Paul S,

The Flexible Furler is warranteed to remain functional for 7 years from date of purchase. You must be the original purchaser of the unit. If, during this period, any part becomes non-functional, CDI will repair or replace it, free of charge, except for freight. 2. Keep your unused halyards flipped to the after side of your spreaders and lightly tensioned. 3. If the unit becomes hard to furl, investigate and correct the cause. Failure to do so can lead to the failure of the forestay. USAGE WARNINGS: The Flexible Furler is NOT designed to be used while your boat is in the

Page 2 WARNINGS – READ BEFORE INSTALLING OR USING YOUR FURLER Improper installation of the Flexible Furler or improper reinstallation of the forestay can cause failure of the forestay, and could result in the loss of the mast and injury to crew members. PRE-INSTALLATION WARNING: You must use toggles at both ends of the forestay. CDI MR4/6Mainsail Roller Furling Unit Mainsail Reefing System by CDICruising Designs offers this affordable Behind-the-Mast mainsail reefing system that can easily be owner installed. This system is based on the proven reliability of the CDI Flexible Jib Furler. CDI is known for practical and reliable cruising products.

Welcome! As many of you know, older boats sometimes don't come with a full complement of documentation. Carelessness, loss, water damage, wild goats, etc. can leave a boat without that one critical piece of information that is sometimes necessary to maintain or repair equipment. Mar 18, 2017 · Your old hank on head sails have done your well, but now is the time to replace it with a furling headsail from Precision Sails and a furling system from CDI Furlers. The Flexible Furler can be

For more detailed information on the replacement parts see the CDI FF2 Manual by following this link. This part is CDI part #2010 or "B" in the diagram. it is a nice upgrade and truly the only way to get maximum performance and ease of use out of the CDI flexible furler system. CDI FLEXIBLE FURLER 2: Installation & Operating Instructions Manual Brand: CDI Category: Boat Size: 0.87 MB Pages: 18. Please, tick the box below to get your link: Get manual Manualslib has more than 31 CDI manuals Checkout popular CDI categories Transmitter Manuals; Headsets Manuals

CDI Flexible Furler YBW Forum

cdi flexible furler 2 manual

Headsail Furling & Bowsprits PEAK SAILS N.A.. Jul 20, 2009 · My CDI-F2 roller furling line is about to give up the ghost. Has anyone had any experience replacing the line. The CDI-F2 manual says wrap it about 20 times and then put through the hole and secure with a knot. When my foresale is completely rolled in there appears to be quite a few wraps on..., for sale is one 4" stainless steel sail furling drum by cdi. flexible furler 2. includes instruction manual. please be familiar with this item & its operation before purchasing. needs replacement cord & stay "luff". i have the 20 foot long luff piece but it is too costly to ship. ….

Furlers CDI Marine Outfitters - Ontario Canada. For more detailed information on the replacement parts see the CDI FF2 Manual by following this link. This part is CDI part #2010 or "B" in the diagram. it is a nice upgrade and truly the only way to get maximum performance and ease of use out of the CDI flexible furler system., Furler Parts. Schaefer Marine carries all your furling needs: Below are a listing of parts for the CF-500, CF-700, 1100, 2100 & 3100 Furling Systems. For your convience print the PDF Parts List for the system you are interested in and go to our parts catalog to find all your necessary pieces. The contact us at 508-995-9511, our contact your.

CDI Flexible Headsail Furler

cdi flexible furler 2 manual

CDI Flexible Headsail Furler. Oct 20, 2011 · http://search.sailrite.com/?freeText=CDI The Cruising Design (CDI) furler provides one of the most inexpensive, effective ways to get more use from your boat... Practical Sailor reports 100% of Flexible Furler owners surveyed would buy their Flexible Furler again CDI was the only major furler manufacturer to receive that level of owner endorsement. The system includes a patented, one-piece, UV stabilized PVC luff extrusion..

cdi flexible furler 2 manual


Jul 09, 2012 · CDI Flexible furler I have CDI Furling on my boat. It IS flexible in one direction; it is flat plastic section approx 30mm x 10mm I bend it round the side of the boat when trailing tied to the pulpit along stanchions and back to the pulpit. For more detailed information on the replacement parts see the CDI FF2 Manual by following this link. This part is CDI part #2010 or "B" in the diagram. it is a nice upgrade and truly the only way to get maximum performance and ease of use out of the CDI flexible furler system.

I have the CDI Flexible Furler FF4 on Robin Lee. I purchased my system as part of a package deal, including my new mainsail and a new 135% genoa, from JSI Sails, who is a CDI reseller. My genoa was cut by JSI exactly to fit the furler, and has white UV protection cloth at the foot and leach. FLEXIBLE FURLER FEATURES What makes a Flexible Furler different from the rest? Simplicity. Often, the simplest product is the best product. The Flexible Furler has one-eighth the number of parts of competitive systems and is the easiest to install, operate and maintain.

Welcome! As many of you know, older boats sometimes don't come with a full complement of documentation. Carelessness, loss, water damage, wild goats, etc. can leave a boat without that one critical piece of information that is sometimes necessary to maintain or repair equipment. Feb 14, 2010 · We have a CDI flexible furler with a 115% genoa that was on our Hunter 22 when we purchased the boat and so far have been very pleased with it. But then again, it is also the first and only flexible furler whit which we have experienced.

Headsail Furler Overview. Whether large or small, your cruising boat or daysailor should have a furling system. Going forward to the bow of any sized boat can be potentially dangerous, especially as the winds come up and you have to change sails. The Flexible Furler can be used to both reef and furl your sail in any wind condition. Jul 11, 2017 · What happened to my CDI furler? A forum for discussing boat or trailer repairs or modifications that you have made or are considering. Moderators: Catigale, Paul S,

Spinnaker Furler. If there is not 6” minimum clearance at the top of the system between the Spi nnaker Furler Top swivel and the headstay, a Spinnaker crane may need to be fabricated or purchased to provide the necessary clearance. The crane is designed to move the Spinnaker halyard CDI Furlers are flexible roller furler that work with your genoa and jib sails. Weekend sailboats as well as coastal cruisers carry the CDI roller furling and reefing system allowing for ease of transportation and durability. The CDI furlers work with luff tape number 6 (5mm) …

CDI Flexible Furlers are made by Cruising Designs as the best selling low cost roller furling unit available. Home > Headsail Roller Furling Systems > CDI FF2 Headsail Roller Furling Unit Categories. Sails in Stock. Balboa. Balboa 22. Mainsails. The Flexible Furler can be used to both furl and reef your sail in any wind condition. P. FLEXIBLE FURLER FEATURES What makes a Flexible Furler different from the rest? Simplicity. Often, the simplest product is the best product. The Flexible Furler has one-eighth the number of parts of competitive systems and is the easiest to install, operate and maintain.

cdi flexible furler 2 manual

Furler CDI Replacement Halyard CP-16, CP-16.5, CP-18, CP-22, C-22, C-25, C-250, CP-26; Furler CDI Replacement Halyard This is a replacement Halyard for the Cruising Designs Flexible Furlers FF1, FF2, and FF4. The flexible furler uses an internal halyard instead of your ship's halyard. One end of the halyard is de-cored and has a small metal Furler Parts. Schaefer Marine carries all your furling needs: Below are a listing of parts for the CF-500, CF-700, 1100, 2100 & 3100 Furling Systems. For your convience print the PDF Parts List for the system you are interested in and go to our parts catalog to find all your necessary pieces. The contact us at 508-995-9511, our contact your

View all posts in Winston category